Allwinner A64 Payment Terminal Board with Face Recognition, WF-SPT-12

TL;DR: Allwinner A64 Payment Terminal Board with Face Recognition

AndroidSBC release: twelve-configuration smart payment terminal board family opens for volume export orders serving international market, Israel. The WF-SPT-12 smart payment terminal Android motherboard covers the legacy Linux payment terminal build for key accounts and eleven sister configurations in the WF-SPT series, spanning the A64 quad-core ARM Cortex-A53 1.2GHz SoC with the ARM Mali-400 MP2 GPU, 5.5-inch 720x1280 LVDS capacitive touch panel, and Android 11 with an optional Linux and Ubuntu build firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-SPT family from the Longgang source factory in Shenzhen to international market and Israel importers who build countertop payment terminals, self-service kiosks, unattended vending and locker machines, transit ticketing gates and outdoor charging pillars.

About AndroidSBC and the Smart Payment Terminal Android Motherboard Family

AndroidSBC is the export brand of Wanlin Manufacturing Group, a Shenzhen source-factory group that has spent more than a decade on Rockchip and Allwinner payment hardware. The smart payment terminal Android motherboard family covered in this release is the WF-SPT line, twelve configurations built around one peripheral contract so a international market integrator can qualify a printer, a reader and a scan engine once and then move across the whole range. The Israel partner gets the compliance file with the first lot - not after the first complaint - because the certification paperwork, the test report and the firmware signing keys are prepared alongside the production order for international market.

WF-SPT-12 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-SPT-12 (legacy Linux payment terminal build for key accounts) holds the touch panel, the thermal printer, the reader and the scan engine together while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Israel importers sourcing the WF-SPT family, the WF-SPT-12-A variant is the typical configuration for the government and bank counters on a frozen software stack use case, in a payment terminal footprint with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Payment Terminal Android Motherboards for Israel Buyers

Payment hardware in Israel is bought against a certification calendar, not a marketing calendar. The board that wins is the one whose compliance file, firmware signing chain and key handling documentation are ready before the acquiring partner asks for them.

Then there is the peripheral question. international market integrators buy printers, scanners and readers from local distributors, and a board whose driver stack was never validated against those specific mechanisms pushes the integration risk onto the Israel partner. The commercial structure is deliberately boring - 26200 boards at a published price, the configuration frozen for the term of the agreement, and the compliance pack reissued whenever the Israel acquiring partner updates its requirements.

Competitive Comparison: WF-SPT-12 vs Competing Smart Payment Terminal Motherboards

Competing boards in this class usually quote a chip and a price. AndroidSBC quotes a configuration: the printer profile, the reader antenna specification, the modem band list, the firmware window and the compliance set for Israel.

• vs consumer tablet boards: the WF-SPT family carries a printer control header, a reader antenna reference design and a scan engine UART mapping, none of which exist on a tablet derivative board.
• vs single-configuration boards: twelve configurations share one peripheral contract, so a international market buyer can move from a countertop lane to an unattended kiosk without re-qualifying the printer or the reader.
• vs boards without a firmware plan: signed images, staged OTA groups with rollback and a published maintenance window come standard, where competing boards ship an image and leave the Israel integrator to manage it.
• vs re-spun designs: the bill of materials is frozen per production lot for the length of the agreement, so the board that passed qualification in international market is the board that ships in volume.

Global Cashless Payment, Smart Terminal and Self-Service Checkout Market Trends

The payment hardware market that matters to international market buyers is not the card terminal of ten years ago. It is the mixed estate - countertop lanes, unattended kiosks, outdoor pillars and softpos capture - and the board that serves all four is the one that wins the Israel programme.

• Countertop tier: WF-SPT-07 covers contactless, IC card, QR and receipt printing in one board, which is the configuration most staffed lanes standardise on.
• Unattended tier: WF-SPT-03 pairs the modem with the printer header and the watchdog for vending, lockers and kiosks where nobody is there to reboot the terminal.
• Flagship tier: WF-SPT-05 adds the larger memory and storage bundle, the customer-facing screen option and the wider temperature window that outdoor and high-throughput formats require.

AndroidSBC positions the WF-SPT family against that reading of the Israel market: one peripheral contract, one Android baseline, one compliance file, so the international market integrator scales without re-qualifying.

WF-SPT-12 Application Scenarios

The WF-SPT-12 legacy Linux payment terminal build for key accounts sits inside a twelve-configuration WF-SPT Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-SPT-12-A configuration is the typical build for the government and bank counters on a frozen software stack use case, with printer current profile, scan engine mapping and staged OTA management bundled.

• Convenience and grocery counters: the WF-SPT-01 takes contactless, IC card and QR at the till and prints the receipt in one pass.
• Restaurant and quick-service counters: the WF-SPT-05 runs order entry, payment and kitchen ticket printing on the same board.
• Unattended vending and lockers: the WF-SPT-03 pairs the modem with the printer header and the watchdog for sites with no staff present.
• EV charging and fuel forecourts: the WF-SPT-09 holds the wide input range and the sunlight readable panel through a full outdoor season.
• Transit gates and event entry: the WF-SPT-11 takes contactless payment and prints the entry ticket without a fixed counter.
• Self-checkout lanes: one board drives the main panel, the scanner and the receipt printer, with the customer screen option where the format needs it.
• Hotel and resort reception: card pre-authorisation, signature capture and folio printing on a board that also runs the restaurant terminal.
• Hospital and clinic payment desks: card, QR and insurance capture on a locked-down build with staged OTA and an audit trail.
• Government and municipal counters: tax, permit and fee payment on a configuration held for the length of the agreement.

Partnership Models for international market Buyers

These are the three structures that Israel partners actually sign, with the engineering scope and the documentation set attached to each one.

• Distribution track: the partner buys the WF-SPT board against a published price list, keeps its own stock, and AndroidSBC supplies the printer profile, the scan mapping and the compliance documents with each lot.
• Integration track: the partner takes the board plus firmware customisation, receipt and language localisation and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-SPT board ships under the partner brand with customised boot logo, packaging, enclosure and documentation, on a fixed bill of materials held for the length of the agreement.

For international market the practical outcome is that the commercial model is negotiable while the technical baseline is not, which keeps aan Israel estate serviceable through growth.

Frequently Asked Questions

Does the smart payment terminal board family support a legacy Linux payment terminal build for key accounts?

Answer: Yes. AndroidSBC holds the legacy Linux payment terminal build for key accounts as a production configuration with a published price, a sample lead time of 1-3 days for international market and a compliance file matched to the parts on the pallet.

Which configurations are available in the WF-SPT family for Israel buyers?

Answer: Buyers in Israel can specify A64 or any of the eleven sister configurations without re-qualifying the printer, the reader or the scan engine, because the peripheral contract is common to the family.

Can one smart payment terminal board drive a touch panel, a thermal printer and a scan engine at once?

Answer: Yes. A single WF-SPT board handles all three peripherals, and the international market acceptance test is run with the actual printer mechanism and scan engine the project will deploy in Israel.

What payment scheme certification support does AndroidSBC provide for Israel?

Answer: Scheme certification in Israel is handled as documentation work: Ministry of Communications type approval with the SII standard mark testing, MoC Israel conformity and a signed firmware image, all matched to the configuration code shipped to international market.

What is the minimum order quantity and the sample lead time for Israel?

Answer: AndroidSBC publishes the price list by configuration and volume tier, quotes international market sample orders in 1-3 days, and holds production capacity at 5000 boards per week for Israel rollouts.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. Firmware customisation covers the ROM, the boot animation, the pre-installed application set and the kiosk lockdown policy, with the signed image delivered alongside the international market production lot.

How are firmware updates delivered to aan Israel device estate after deployment?

Answer: OTA delivery for Israel deployments runs through the AndroidSBC update service or the MDM platform the partner already runs, with signed images and a rollback path held for every release.

What shipping terms does AndroidSBC support for Israel orders?

Answer: AndroidSBC ships EXW, FOB Shenzhen, CIF and DAP terms, with Port of Haifa as the standard discharge port for Israel orders and the compliance file attached to the carton.

Contact AndroidSBC: Start Your WF-SPT-12 Sourcing Conversation

The Israel desk at AndroidSBC handles configuration selection, sample dispatch, joint qualification and volume scheduling, and the first call is technical rather than commercial.

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

Wanlin Manufacturing Group, through its AndroidSBC export brand, is the source factory behind the WF-SPT family and is appointing local partners across Israel. Volume pricing, private-label terms and joint qualification slots for international market are open now.