Retail Self-Checkout Board for Convenience Store Counter, WF-P3399, AndroidSBC, Tel Aviv

TL;DR: Retail Self-Checkout Board for Convenience Store Counter

AndroidSBC supply desk: LPDDR4X and eMMC allocations locked for the WF-P board family serving Tel Aviv, Israel. The WF-P3399 POS Android motherboard spans the dual-screen high definition POS with 4K promotion wall and eleven sister models in the WF-P series, all built on the RK3399 dual Cortex-A72 1.8GHz plus quad Cortex-A53 SoC with the ARM Mali-T860 MP4 GPU, HDMI 2.0 plus eDP output at 4K@60Hz, and Android 11 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Tel Aviv and Israel importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.

About AndroidSBC and the POS Android Motherboard Family

AndroidSBC, a Wanlin Manufacturing Group export brand, treats the POS board as the long-lived part of the terminal, not the disposable one. The WF-P family is specified for a seven-year firmware window and 7x24 counter duty, and each lot ships with the receipt printer, barcode scanner, cash drawer and payment reader drivers already validated against the target Android build. Peripheral validation happens on the Longgang bench with the actual printer, scanner and drawer models the Tel Aviv integrator intends to use, and the result is written into the shipment file rather than left to the integrator to discover on site.

WF-P3399 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P3399 (dual-screen high definition POS with 4K promotion wall) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Israel importers sourcing the WF-P family, the WF-P3399-A variant is the typical configuration for the flagship store checkout plus media wall use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing POS Android Motherboards for Israel Buyers

And there is the long tail: the board has to survive a firmware update pushed to four hundred lanes at once, roll back cleanly if the update fails, and keep the drawer and printer working through both.

Staged OTA is shipped as a tool, not a promise. A Tel Aviv chain can push an update to a pilot group of lanes first, hold the rest, and roll back the image if the pilot shows a printer regression, all from the same console. 149300 WF-P boards cleared final test on September 23, 2026 for Tel Aviv, booked on the Haifa - Shanghai lane. The country compliance note for Israel sat in the shipment folder alongside the peripheral validation report.

Competitive Comparison: WF-P3399 vs Competing POS Android Boards

The WF-P family was specified against the failure modes Tel Aviv chains reported on previous rollouts, which is why the comparison reads the way it does.

• Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
• Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.

Global POS Terminal and Smart Checkout Market Trends

The Israel picture follows the global pattern: cashless adoption sets the demand, and the replacement of legacy registers sets the volume. A Tel Aviv integrator who can offer a board that drops into an existing enclosure wins on installation cost as much as on unit price.

• Entry counter tier: WF-P3399 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
• Dual-screen mainstream tier: WF-P3601 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
• AI and unattended tier: WF-P3602 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.

The eight-tier WF-P line exists because Tel Aviv rollouts are not uniform. One chain will use four of the twelve models, and the point is that all four share one driver contract.

Partner Success Story: Loire Comptoir Numerique (boutique retail POS integrator)

The Loire Comptoir Numerique rollout in the French specialty retail segment shows how the WF-P family from AndroidSBC supports Tel Aviv integrators. Loire Comptoir Numerique installed 149300 WF-P boards across 45 boutique counters.

• OEM relationship: AndroidSBC private-label SKU shipped with Loire Comptoir Numerique branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus MoC Israel conformity, all bundled into the Shenzhen source-factory shipment.

In the words of Loire Comptoir Numerique Director of Systems for French Specialty Retail: Loire Comptoir Numerique needed the fiscal log retention behaviour documented for the French audit, and 149300 WF-P boards shipped to Tel Aviv with that evidence in the file.

Field Report: flagship store checkout and media wall installation

LONGGANG, September 23, 2026 - Man Qing, AndroidSBC field desk. What the Israel engineers checked first was the drawer pulse: the WF-P3399 fired the cash drawer on the RJ11 header across a thousand cycles without a miss. The WF-P3399 POS Android motherboard order for Tel Aviv, Israel cleared the burn-in station on schedule and is en route via the Haifa - Shanghai lane.

The WF-P3399 dual-screen high definition POS with 4K promotion wall production lot includes the WF-P3399-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Israel integrators, the MoC Israel conformity plus Ministry of Communications type approval with the SII standard mark paperwork is bundled.

Filed by Man Qing, AndroidSBC field desk, LONGGANG. Israeli retail groups ask for MOC radio approval and Hebrew receipt layout, and they test the EMV kernel against local acquirer terminals.

WF-P3399 Application Scenarios

The WF-P3399 dual-screen high definition POS with 4K promotion wall sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P3399-A configuration is the typical build for the flagship store checkout plus media wall use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.

• Supermarket and hypermarket checkout: the WF-P3399 drives the cashier screen while the second lane carries the customer display or the promotion wall in Tel Aviv.
• Convenience and small format stores: the WF-P6180 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
• Restaurants and quick service: the WF-P5270 runs the order screen plus a kitchen display output, with the customer display showing the order total.
• Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
• Unattended retail and vending: the WF-P7600 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
• Fuel forecourts and parking: the WF-P7601 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
• Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
• AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
• Retrofit programmes in Tel Aviv: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.

Partnership Models for Tel Aviv Buyers

AndroidSBC does not force a track on Israel partners. The three below are the ones that actually get used.

• Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

All three tracks give Tel Aviv partners the same thing underneath: a factory-built board, a frozen BOM and a firmware window measured in years rather than months.

Frequently Asked Questions

Does the WF-P POS Android motherboard family support a dual-screen high definition POS with 4K promotion wall?

Answer: Yes - dual-screen high definition POS with 4K promotion wall is supported across the WF-P line, and the Tel Aviv configuration is locked as the reference for later lots so re-orders behave identically.

Which silicon tiers are available in the WF-P family for Israel buyers?

Answer: Eight silicon tiers are offered, and the RK3399 platform sits in the middle of the range. Each tier carries the same peripheral interface contract, so a Tel Aviv partner can move between them without re-writing drivers.

Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?

Answer: It can. The WF-P family is specified so one board carries the full counter harness: printer, scanner, drawer, customer display and payment reader, with no expansion card required.

What is the minimum order quantity and the sample lead time for Israel?

Answer: Sample lead is 1-3 days and mass production is 15-30 days. MOQ depends on the track - distribution partners work from the price list, private-label SKUs are agreed per configuration.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. AndroidSBC provides custom Android AOSP builds, custom boot animation and logo, pre-installed apps, custom UI, BSP porting and SDK modules, all built against a frozen BOM.

How are firmware updates delivered to aan Israel estate after deployment?

Answer: The OTA channel is staged and reversible. A Tel Aviv chain pushes to a pilot group first, and if a printer or drawer regression appears the image rolls back to the previous build.

What shipping terms does AndroidSBC support for Israel orders?

Answer: The export desk quotes FOB Shenzhen, CIF and EXW, handles customs clearance, and ships globally. The Tel Aviv partner picks the term and AndroidSBC books the lane.

What happens if a board fails in the field in Israel?

Answer: Failures are handled against the serialised test record. AndroidSBC traces the unit to its lot, confirms the BOM, and ships a replacement from the Tel Aviv call-off stock or the next production slot.

Contact AndroidSBC: Start Your WF-P3399 Sourcing Conversation

Tel Aviv integrators can reach the AndroidSBC export desk for the WF-P POS board family through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Israel buyers, a 15-30 day mass-production lead to bulk orders, and a seven-year firmware update window to the WF-P family.