RK3568 Government Self-Service Board for Immigration Counter, WF-S3399, AndroidSBC, Tel Aviv

TL;DR: RK3568 Government Self-Service Board for Immigration Counter

AndroidSBC release: twelve-model WF-S government service kiosk motherboard family opens for volume orders serving Tel Aviv, Israel. The WF-S3399 government service kiosk Android motherboard spans the dual-screen high definition service terminal and eleven sister models in the WF-S series, all built on the RK3399 dual Cortex-A72 1.8GHz plus quad Cortex-A53 SoC with the ARM Mali-T860 MP4 GPU, dual 4K output, HDMI plus eDP, and Android 11 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-S family from the Longgang source factory in Shenzhen to Tel Aviv and Israel importers who run citizen service hall, tax and social security counter, certificate printing, identity verification, public information display and outdoor smart city programmes.

About AndroidSBC and the Government Service Kiosk Android Motherboard Family

For Israel integrators working in Tel Aviv, the WF-S family is a sourcing shortcut: one supplier, eight silicon tiers, one driver SDK and one firmware cadence across enquiry, payment, printing and identity terminals. AndroidSBC holds buffer stock on the Rockchip and Allwinner tiers so public sector orders do not wait on a wafer allocation. AndroidSBC keeps buffer stock on the Rockchip and Allwinner tiers so Tel Aviv and Israel orders do not wait on a wafer allocation, and each production lot is locked to one BOM for traceability.

WF-S3399 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-S3399 (dual-screen high definition service terminal) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Israel importers sourcing the WF-S family, the WF-S3399-A variant is the typical configuration for the high resolution citizen information terminal use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Government Service Kiosk Android Motherboards for Israel Buyers

The first obstacle for Israel buyers is specification drift. A datasheet says RK3588, the delivered lot carries a different memory vendor, and the identity reader driver that passed the pilot fails on the production image six months later.

On cost the answer is a tier ladder, not a discount. AndroidSBC maps the Tel Aviv estate by job: enquiry points on the entry tiers, dual-screen counters on the mid tiers, AI identity verification on the RK3588 tier, so aan Israel programme does not pay flagship pricing for a notice screen. On the Haifa - Shanghai lane, 22900 boards are committed for Tel Aviv and Israel as of September 20, 2026; AndroidSBC counts this as the 3rd release window on the family.

Competitive Comparison: WF-S3399 vs Competing Government Service Kiosk Android Boards

Most Israel public sector comparisons collapse into the same trade-off: a cheaper board that pushes integration work onto the integrator, or a board that arrives integrated. The following four lines show where the WF-S family sits for Tel Aviv.

• vs single-platform board vendors: the WF-S family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-S family arrives with capacitive and IR touch, ID card reader, fingerprint module, face recognition camera, QR code, NFC, barcode scanner, thermal printer, document scanner and relay drivers already integrated, so the {city} integrator writes the citizen service application rather than the driver layer.
• vs boards without unattended-operation features: the WF-S family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown, secure boot and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-S family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a citizen screen plus an operator screen and a mirrored duplicate.

Global Government Self-Service / Citizen Service / Public Information Terminal Market Trends

Public sector estates keep pulling board demand: dual-screen high definition service terminal programmes in Israel are the near-term driver, and the public-sector self-service kiosk market is tracked at about USD 2.05 billion in 2025 against USD 3.95 billion by 2032, a 9.8 percent compound annual rate.

• Citizen service halls and municipal counters: WF-S3399 is the usual starting point for hall rollouts, with the dual-screen WF-S6180 as the citizen plus operator option.
• Tax, social security and housing fund terminals: the mid-tier WF-S6180 and the printing-capable WF-S5270 sister SKUs form the counter ladder, with certificate printing and queue management.
• Outdoor and 24-hour unattended cabinets: WF-S5270 and the industrial sister SKUs cover continuous-operation municipal self-service points across a city estate.

Two numbers decide aan Israel government kiosk programme: how many terminals a hall actually needs, and how many years the estate has to be supported. AndroidSBC plans the WF-S family against both and shares the model with Tel Aviv integrators on request.

Partner Success Story: Loire Services Publics (public service modernisation integrator)

A recent Loire Services Publics deployment in the France government segment shows how the WF-S government service kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand, supports Tel Aviv integrators. Loire Services Publics placed 22900 WF-S service boards across prefecture offices, tax centres and municipal service points.

• OEM relationship: AndroidSBC private-label SKU shipped with Loire Services Publics branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, ID card reader, fingerprint module, face recognition camera, QR code, NFC, barcode scanner, thermal printer, document scanner and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown, secure boot and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus MoC Israel conformity, all bundled into the Shenzhen source-factory shipment.

Loire Services Publics Digital Service Manager for France Government highlighted: Loire Services Publics had to show a conformity file and a revision history at acceptance, and AndroidSBC produced both from the Shenzhen plant, which is why the 22900 terminals cleared the Tel Aviv tender without a second audit.

Field Report: dual-screen information terminal rollout at a public security service hall

SHENZHEN, September 20, 2026 - Bai Yu, AndroidSBC field desk. Before palletisation the WF-S3399 boards were checked against the dual-screen high definition service terminal driver set, and the firmware revision was stamped into the test report that travels with the Israel shipment. The WF-S3399 government service kiosk Android motherboard order for Tel Aviv, Israel cleared the burn-in station on schedule and is en route via the Haifa - Shanghai lane.

The WF-S3399 dual-screen high definition service terminal production lot includes the WF-S3399-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Israel integrators, the MoC Israel conformity plus Ministry of Communications type approval with the SII standard mark paperwork is bundled.

Filed by Bai Yu, AndroidSBC field desk, SHENZHEN. MoC plus SII; Tel Aviv municipal service centres favor AI-augmented identity verification boards with on-device inference.

WF-S3399 Application Scenarios

The WF-S3399 dual-screen high definition service terminal sits inside a twelve-variant WF-S government service kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-S3399-A configuration is the typical build for the high resolution citizen information terminal use case, with identity peripheral driver SDK and staged OTA management bundled.

• Citizen service hall enquiry and queue points: WF-S3399 plus WF-S8800 form the hall entry ladder, with independent dual display output and 4K HDMI.
• Tax, social security and housing fund counters: WF-S8800 plus WF-S8801 are the usual pairing where certificate printing and ID verification run on the same board.
• Immigration and public security checkpoints: WF-S8801 is the dedicated secure identity SKU, with secure boot, trusted execution and an audit trail that survives a power cycle.
• AI identity verification and face recognition terminals: WF-S3600 plus WF-S3601 cover the vision and verification workload on the device.
• Community and neighbourhood service desks: the compact WF-S3399 and the entry-tier sister SKUs serve walk-in enquiry where counter space is limited.
• Outdoor and semi-outdoor municipal cabinets: the industrial T527 sister SKU takes the 24-hour unattended points that see a full seasonal temperature range in Tel Aviv.
• Hall notice and announcement networks: the H618 and A133 sister SKUs drive continuous-play public information screens across a Tel Aviv building estate.
• Document scanning and form filling terminals: WF-S3601 plus WF-S8800 pair the scanner and the signature pad on one board for the Tel Aviv administration.
• Legacy estate refresh programmes: the RK3288 and RK3399 sister SKUs match the mechanical and electrical footprint of existing Tel Aviv hall terminals, so a refresh does not become a redesign.

Partnership Models for Tel Aviv Buyers

AndroidSBC publishes the three tracks it runs for Tel Aviv and Israel because public sector procurement usually dictates which one applies before the technical discussion starts.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

One production line in Longgang serves all three tracks, so a Tel Aviv partner who starts on the distribution track and later commissions an ODM design stays on the same Israel supply chain.

Frequently Asked Questions

Does the WF-S government service kiosk Android motherboard family support a dual-screen high definition service terminal?

Answer: Yes. The dual-screen high definition service terminal is supported out of the factory image, and AndroidSBC validates it again on the production lot before the Israel shipment leaves Shenzhen.

What is the real difference between the RK3399 tier and the other silicon tiers in the WF-S family?

Answer: The difference shows up in display paths, NPU availability and temperature range. The RK3399 sits where it does on the WF-S ladder because that is the point where the workload it serves becomes the binding constraint for Tel Aviv deployments.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Israel?

Answer: Yes. For Israel shipments the MoC Israel file and Ministry of Communications type approval with the SII standard mark documentation are prepared in Shenzhen, so the Tel Aviv integrator receives a complete paperwork set rather than a promise to follow up.

What are the MOQ and lead time for a first order of the WF-S government service kiosk Android motherboard family?

Answer: Sample orders from one piece, OEM from 100 pieces, ODM from 500 pieces, and a 15-30 day mass-production window once the Israel BOM is signed off. AndroidSBC publishes all four numbers to Tel Aviv buyers up front.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-S family?

Answer: Yes. The software team at AndroidSBC handles custom Android ROM work, AOSP builds, Linux BSP porting and a private driver SDK for the WF-S family, all maintained inside the seven-year support window.

How are software updates and long-term support handled on the WF-S family?

Answer: Updates reach Tel Aviv estates through a staged channel with rollback. AndroidSBC publishes the revision, the Israel integrator validates it against the identity peripherals, then releases it on their own schedule.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-S family?

Answer: Yes. AndroidSBC ships to Amazon FBA and to 3PL consolidation warehouses, with carton labelling, palletisation and export documentation prepared in Shenzhen for Tel Aviv and Israel destinations.

How are RMA and DOA replacements handled on the WF-S government service kiosk Android motherboard family?

Answer: DOA replacement ships with the next consignment, and RMA cases are processed against the lot record AndroidSBC maintains for Tel Aviv and Israel, including the burn-in and peripheral test logs.

Contact AndroidSBC: Start Your WF-S3399 Sourcing Conversation

For the WF-S government service kiosk Android motherboard family, AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels to Tel Aviv integrators:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Israel buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window on the WF-S family.