Self-service Payment Kiosk Board, WF-RK3588S, AndroidSBC, Tel Aviv

TL;DR: Self-service Payment Kiosk Board

LONGGANG, Shenzhen, September 10, 2026 - The Rockchip RK3588 line at Wanlin Longgang closed lot 356 this week: 23,995 WF-RK3588S boards bound for Tel Aviv, Israel, each unit traceable to its own burn-in barcode.

AndroidSBC benchmark note covering the WF-Series custom board line serving Tel Aviv, Israel. The WF-Series is a nine-board line rather than a single part number, and the shape is deliberate. Allwinner A133, H618, and T527 cover cost-sensitive display, OTT and Android TV, and industrial edge inference; Rockchip RK3588, RK3568, RK3566, and RK3288 cover 8K video wall, industrial edge, machine vision, and POS; WF-A133S and WF-RK3588S are SOM modules for carrier-board projects. A Tel Aviv buyer can hold one supplier file, one documentation format, and one MOQ structure across every tier it sells.

About AndroidSBC and the Rockchip RK3588 Board Family

The group behind the WF-Series is Wanlin Manufacturing Group in Shenzhen, and AndroidSBC is how it reaches overseas buyers. The line covers seven silicon platforms across nine boards: Allwinner A133, H618, and T527, plus Rockchip RK3588, RK3568, RK3566, and RK3288, with WF-A133S and WF-RK3588S as module options. Longgang handles SMT, burn-in, and packing under one roof, and the certification desk produces the CE, FCC, UKCA, RoHS, and REACH file per lot. A Tel Aviv buyer assembling a catalogue for Israel can cover the OTT, display, industrial, vision, and POS tiers without adding a second supplier.

WF-RK3588S Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-RK3588S (SOM Module and SMARC Carrier Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For Israel importers sourcing the WF-Series, the 8GB + 64GB, SMARC 2.2 (WF-RK3588S-A) variant is the typical configuration for the SMARC module and custom carrier integration use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing SOM Module and SMARC Carrier Board for Israel Buyers

Importers in Tel Aviv usually discover the same thing about the som module and smarc carrier board category: the quote is easy and the repeat shipment is not. The Rockchip RK3588 part depends on a specific wafer allocation, and the second and third orders are where a supply chain either holds or quietly slips a quarter. Software continuity is the second trap. A bare Android image boots fine on the bench, so the problem tends to appear only after the Tel Aviv customer has taken delivery and the first OTA push fails against the DRM credentials.

The third issue is documentation. Some factories stamp the CE mark without the Declaration of Conformity and the Technical File behind it, and the container then sits at the port while the importer tries to reconstruct a test report from a supplier who has already been paid. The answer AndroidSBC applies is to move both risks upstream: the certified image is burned at Longgang, the burn-in record is attached per unit, and the Technical File ships with the lot rather than after it. Across the nine WF-Series boards, the coverage runs from SMARC module design, COM Express Type 6 builds, edge AI boxes, video wall controllers, medical imaging terminals, autonomous vehicle compute, and bespoke industrial carriers, so a Israel buyer can generally find a standard configuration instead of paying for a bespoke one.

Israel importers usually raise compliance first. In Israel Ministry of Communications approval and the SII mark are both required, and the importer of record carries the approval. AndroidSBC answers it by preparing the Ministry of Communications type approval with the SII standard mark documentation for MoC Israel before the lot is packed, issuing it with the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), and routing the lot through Port of Ashdod on the Ashdod to Piraeus relay.

Competitive Comparison: WF-RK3588S vs Competing RK3588 Boards

The comparison set for the som module and smarc carrier board socket breaks three ways: cheap legacy boards without a software file, mid-range Cortex-A55 boards with certification but limited decode headroom, and 64-bit boards that carry both. The WF-RK3588S is in the last group. Its differentiators are Rockchip RK3588, display stability under sustained load, and a per-lot certified image burn rather than a bench-only software check.

• vs proprietary SOM pin-outs: the SMARC 2.2 standard lets the carrier survive a module generation change without a re-layout.
• vs RK3568 SMARC modules: the RK3588 module adds 8K@60fps decode, PCIe 3.0 x4, and 6 TOPS NPU on the same 314-pin edge.
• vs x86 COM Express modules: the RK3588 module runs Android natively, which removes the OS licensing line from the BOM.
• vs module-only vendors: AndroidSBC ships the carrier reference design plus the signal integrity report with the module.

Global SMARC and COM Express Module Engineering Market Trends

Order timing in Israel now follows the SMARC and COM Express Module Engineering curve rather than the old annual budget cycle. Global Growth Insights sizes the Android TV Box segment at USD 12.45 billion for 2025 with a 30.49 percent CAGR to USD 178.2 billion by 2035 (Global Growth Insights, 2025-2035), and that consumer volume is the reference point Israel buyers use when they argue about lead time. In Tel Aviv, it shows up as three distinct demand patterns across the WF-Series:

• SMARC module design: WF-RK3588S seats on the 314-pin MXM edge with the carrier holding the I/O.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-RK3588S board carries that headroom without a board change.
• Edge AI boxes: WF-RK3588S runs 6 TOPS NPU inference on the carrier-side thermal solution.

The read across the SMARC and COM Express Module Engineering channel is that buyers are consolidating suppliers: fewer vendors, wider platform coverage per vendor, and a longer contract behind each order.

The common thread for Israel is that single orders are giving way to blanket agreements released monthly, which is what a twelve-month retail or hospitality programme needs in order to avoid a gap in the middle of the year.

Partner Success Story: Baltic Marine Electronics in Tel Aviv, Israel

Baltic Marine Electronics, a marine electronics contractor serving the Israel market, deployed 2,400 units of the WF-T527 gateway board for a vessel monitoring retrofit. The rollout covered the smarc module design, edge ai boxes, and autonomous vehicle compute workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 2,400 units of the WF-T527 gateway board for a vessel monitoring retrofit
• Region: Tel Aviv, Israel
• Models used: WF-A133, WF-H618, WF-T527, WF-RK3588, WF-RK3568, WF-RK3566, WF-RK3288, WF-A133S, WF-RK3588S
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, GMS, Widevine L1, Dolby Audio
• Logistics: FOB Qingdao with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Ashdod via the Ashdod to Piraeus relay

"Salt air and vibration are unforgiving. The conformal coating and the -40C to 85C rating on the T527 board were the two specification lines that decided the tender for us."

- Piotr Nowak, Engineering Manager

Field Report: a high-brightness outdoor display trial in Tel Aviv, where 23,995 units of the WF-RK3588S board are running behind sunlight-readable panels

Reporter Zhang Hao, on the ground in Tel Aviv, Israel. The trial ran the WF-RK3588S boards inside a sealed enclosure with no active cooling and a panel brightness pushed to its ceiling. Internal board temperature stabilised below the throttle point across a full day of direct sun, and the content loop ran without a dropped frame from morning to evening.

A spare-parts kit was packed alongside the order so the destination depot could swap a board without waiting on a cross-border shipment.

The inspection confirmed three things on the spot: the WF-RK3588S units hold the burn-in with a yield above 99.42 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering Ministry of Communications type approval with the SII standard mark administered by MoC Israel, cleared for entry at Port of Ashdod on the Ashdod to Piraeus relay. Wanlin remains one of the few source factories currently shipping a nine-board Allwinner and Rockchip custom line with a per-lot paper trail that Israel importers can hand straight to their customs broker.

Filed by Zhang Hao, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-RK3588S Application Scenarios

The WF-Series fits nine application lanes, with the WF-RK3588S (SOM Module and SMARC Carrier Board) as the lead SKU for Tel Aviv and Israel programmes:

• SMARC module design: WF-RK3588S seats on the 314-pin MXM edge with the carrier holding the I/O.
• COM Express Type 6 builds: WF-RK3588S maps to the Type 6 pin-out for existing x86 carriers.
• Edge AI boxes: WF-RK3588S runs 6 TOPS NPU inference on the carrier-side thermal solution.
• Video wall controllers: WF-RK3588S drives HDMI 2.1 and DP 1.4 out through the carrier.
• Medical imaging terminals: WF-RK3588S pairs PCIe 3.0 x4 with the carrier frame grabber.
• Autonomous vehicle compute: WF-RK3588S holds -40C to 85C on the automotive-grade carrier.
• Bespoke industrial carriers: WF-RK3588S ships the signal integrity report for the customer stack-up.
• Carrier bring-up: WF-RK3588S comes with the BSP port for the carrier revision.

Partnership Models for Tel Aviv Buyers

Three commercial structures are open to Tel Aviv buyers on the WF-RK3588S and the rest of the WF-Series:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

The three tiers share one factory, one test flow, and one certification file. For Tel Aviv buyers the standard entry point on the WF-RK3588S is the 8GB + 64GB, SMARC 2.2 (WF-RK3588S-A) configuration at MOQ 5,000 units per shipment, four weeks to sample and six weeks to mass production.

Frequently Asked Questions

Does the WF-Series support certified Android TV or Google Mobile Services?

Answer: On the WF-H618, yes: ATV 12 with GMS plus Widevine L1 and Dolby Audio, burned on the Longgang line for every lot. On the remaining eight boards the default image is AOSP or a Linux distribution, because those boards usually sit in commercial display, industrial, or POS deployments where Play Services is not a requirement. AndroidSBC will build a GMS image for ODM customers who ask for it and will state clearly which boards carry which certification.

What is the difference between the nine WF-Series models?

Answer: Nine boards, seven silicon platforms, two of them modules. WF-A133 and WF-H618 and WF-T527 are the Allwinner entries for commercial display, OTT TV, and industrial edge respectively. WF-RK3588, WF-RK3568, WF-RK3566, and WF-RK3288 are the Rockchip entries for 8K video wall, industrial edge, machine vision, and POS. WF-A133S and WF-RK3588S are board-to-board SOM modules sized for customers who want to design the carrier themselves. Each board carries three memory configurations.

Can AndroidSBC handle CE, FCC, UKCA, RoHS, and REACH paperwork for Israel?

Answer: That is handled in-house. Each lot leaves Longgang with a Declaration of Conformity and a Technical File holding the CE, FCC Part 15, UKCA, RoHS 2.0, and REACH documents, all dated inside twelve months. For Israel specifically, AndroidSBC will confirm at quotation stage which marks apply and whether a local variation is required, so the paperwork question is settled before production rather than at the port.

What are the MOQ and lead time for a first order?

Answer: MOQ is 5,000 units per shipment for the standard memory configuration of any WF-Series board. Sample lead time runs four weeks and mass production six weeks. Partners who prefer a twelve-month blanket order with a monthly lot release can negotiate the MOQ down, and mixed-platform orders on one purchase order are accepted.

Does AndroidSBC support custom Android ROM or custom Linux development?

Answer: Yes. Under NDA, AndroidSBC delivers custom Android ROM work with proprietary services, custom Linux images on Yocto or Debian or Buildroot, and BSP ports for customer carriers. The engineering desk at Longgang performs the port itself, which matters because an unmodified vendor BSP rarely matches a customer carrier revision.

What about software updates and long-term support?

Answer: The commitment is seven years minimum on supply, with security patches back-ported across the Android and Linux tracks. AndroidSBC also runs an OTA service that partners can use to push firmware to deployed units. On POS and industrial programmes, that commitment is written into the contract, because a fleet in the field is only as good as the update path behind it.

Can AndroidSBC ship to Amazon FBA warehouses or 3PL consolidation points?

Answer: Yes. AndroidSBC ships DDP to Amazon FBA warehouses in the US, EU, and Japan, and to nominated 3PL consolidation points in Hong Kong, Singapore, Rotterdam, and Los Angeles. Carton labelling and pallet configuration are set up for FBA inbound requirements, and the export declaration names the Wanlin Longgang source factory as the place of origin.

How does AndroidSBC handle RMA or DOA replacements?

Answer: AndroidSBC targets a 0.3 percent DOA rate across the WF-Series, measured over the prior twelve months. On RMA, the partner returns the faulty WF-RK3588S unit to Longgang with its burn-in barcode, and a replacement ships within ten business days. Because the burn-in record is attached per unit, the failure analysis normally comes back with a root cause rather than a credit note.

Contact AndroidSBC: Start Your WF-RK3588S Sourcing Conversation

The AndroidSBC export desk handles all WF-Series enquiries from Tel Aviv and Israel. Direct factory contact on the WF-RK3588S and the rest of the som module and smarc carrier board line is available through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: Ministry of Communications type approval with the SII standard mark for Israel, administered by MoC Israel, entering at Port of Ashdod on the Ashdod to Piraeus relay
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

OEM and ODM enquiries move fastest when the first message carries the annual volume, the certification scope, and the Incoterm. Send those three and the export desk replies with a per-lot quote and the full WF-Series MOQ matrix inside two business days.